Cutter Studio

Drop an SVG, DXF, PLT or image here or use Import, the Text tool or a shape on the left

Selection

Nothing selected. Click an object, or drag a box around several.

Cut settings

Speed mm/s Force g Passes Blade offset mm Overcut mm Swivel above °

Cut order

Copies Gap mm

Cut selected objects only Ignore page position (start at origin)

Speed and force are only sent if enabled under Machine; otherwise the values set on the cutter's panel are used.

Machine

Port

Direct USB needs the WinUSB driver for the cutter, installed once with Zadig (see the README). The bridge does not need it.

Cutting width mm Page length mm Steps per mm After cutting Scale X % Scale Y %

Orientation Mirror along feed Mirror across width Swap X / Y axes

Use a test cut (Manual control) to check: the arrow should point along the feed and the small square should be in the far corner from the origin edge.

Commands Send speed and force from this app

Speed command Force command

Placeholders: {mm_s}, {cm_s}, {g}. Firmware differs - try a test cut first.

Command preset Start of job End marker sent after every job and manual command Padding spaces at the end

Points per PD Chunk size bytes

Line break after each command

Manual control

Step mm

Head at 0, 0 mm (blade up).

Test square mm

Send raw HPGL